Glossary

Word of the Day!

waste mold


This term is used in two contradictory ways. In its most common use: a piece mold made from a model (usually of clay or wax) when the model must be broken apart (wasted) in removing it from the mold. The other use: a mold from which only one cast can be taken, because the mold must be broken apart and discarded in order to release the cast. This is how lost-wax casting is accomplished, for instance. The use of this term is highly problematic then, unless the user immediately explains the meaning intended.


A

When found on a tube or other container of paint, indicates the standard degree of color permanence.

jump to top of page

a secco

The wet plaster applied during the fresco painting technique.

jump to top of page

A. P.

Abbreviation for artist's proof.

jump to top of page

AA

When found on a tube or other container of paint, indicates the highest degree of color permanence.

See Also:  ABCcolor permanence

jump to top of page

abbozzo

In painting, blocking in-- the first sketching done on the canvas, and also the first underpainting. In sculpture, a mass of material that has been carved or manipulated into a rough form of the ultimate work. Italian for "sketch."

jump to top of page

abrade

See abrasive.

jump to top of page

abrasive

A substance which wears down a surface by the friction of rubbing against it. Sandpaper, for instance, has an abrasive surface used to smooth rough surfaces. To wear down by rubbing is to abrade. As a technique of shaping solid forms, this is called abrasion.

See Also:  carborundumcarvingcorundumemeryfinishrottenstone

jump to top of page

absorbent ground

A ground or coating on a surface that can absorb the liquid from paint applied to it.

See Also:  gessovehicle

jump to top of page

absorption

Refers to the light absorbing behavior of some surfaces-- various characteristics determine the degree to which surfaces absorb certain colors. The light which is absorbed is converted to heat, while light not absorbed is either transmitted (by transparency or translucent surfaces) or reflected (by opaque surfaces). Not to be confused with adsorption.

jump to top of page

abstraction

Art that does not imitate reality. Non representational, non-figurative art work.

Example: Jackson Pollock

jump to top of page

academies

The first art academy was founded during the Italian Renaissance and based on Plato's Academy and Humanist philosophy. By the late 19th century, one hundred art academies were scattered through Europe.

Example: Royal Academy of Art

jump to top of page

acanthus

A spiked, prickly leaf from the regions of the Mediterranean. The acanthus is often seen as a part of the decoration on the capital of a Corinthian column, one of the three main architectural orders.

Example: Façade of the Pantheon, Rome, Italy

jump to top of page

accelerator

A substance which speeds up a chemical change. An accelerator is added to oil paints to speed drying (also called a "drier"), and to polyester resin to promote curing. Alum is added to plaster as an accelerator to quicken its setting.

jump to top of page

accidental color

Color obtained by mixing on a painting's surface without conscious preliminary planning during the process of painting.

jump to top of page

acetate

The common name for a type of strong, transparent or semi-transparent sheets of plastic, available in various thicknesses, and used in making covers for artwork, as the basis for photographic film, in color separation, in retouching, as cells in animated filmmaking; as a material for printing plates, and as an ingredient in some plastics, textile fibers, and lacquers. It should not be expected to be a permanent material.

See Also:  acetate colorcellocut

jump to top of page

acetate color

Opaque, waterproof paint which doesn't crawl or peel when used on acetate, glass, foil, or other extremely smooth surface. Acetate ink is an ink which can be applied either with a pen or a brush, and adheres to extremely smooth surfaces.

jump to top of page

acetic acid

In graphics, a liquid used to clean a plate just before the mordant is applied.

jump to top of page

acetone

A volatile solvent, commonly used with lacquers and in paint-removers; also known as dimethyl ketone and 2-propanone. It is soluble in water and alcohol. It is non-photochemically reactive. One of its uses is to clean up epoxy resins, polyester resins, contact cement, fiberglass, along with many inks and adhesives. Acetone is often used in the cleaning and restoration of old paintings. Because of its toxic and highly flammable qualities, carefully read cautioning labels on containers. (pr. ass"e-tone')

jump to top of page

acetylene

A colorless gas burned in combination with oxygen for oxyacetylene welding. Explosive, especially if used in welding with gauge pressures over 15 psig (30 psig absolute). It has a garlic-like odor. Tank sizes available are 10, 40, 75, 100, and 300 cubic feet. (pr. uh-se"te-leen')

See Also:  weldingcarbon dioxidehelium

jump to top of page

achromatic

Color having no chroma-- black, white and grays made by mixing black and white. All other colors employ chromatic pigments. (pr. ay'crow-ma"tick)

See Also:  grisaille

jump to top of page

acid bath

In etching, the mordant-- either an acid or a diluted acid-- in which a printing plate to be etched is placed.

See Also:  acetic acid

jump to top of page

acid dye

A very large class of dyes containing acidic groups, such as the sodium salts of sulfonic acids or phenolic groups. Acid dyes are used in dyeing leather, paper and natural fibers. Their particular value lies in an ability to produce bright, uniform colors.

jump to top of page

acid free

Said of papers with a 7 pH, or very close to 7 pH. Below 6.5 pH or above 8.5 pH is not considered acid-free. Acid-free material are more permanent, less likely to discolor, or to corrupt materials they are placed with over time. Works on paper, and the mats, mounts, etc. with which they are framed, are best acid-free.

jump to top of page

acrylic flow improver

A medium used with acrylic paints designed to improve their flow without diminishing the strength of its color.

jump to top of page

acrylic paint

Synthetic paints, with pigments dispersed in a synthetic vehicle made from polymerized acrylic acid esters, the most important of which is polymethyl methacrylate. First used by artists in the late 1940s, their use has come to rival that of oil paints because of their versatility. They can be used on nearly any surface, in transparent washes or heavy impasto, with matte or glossy finishes. Acrylic paints dry quickly, do not yellow, are easily removed with mineral spirits or turpentine (use acetone if those don't remove enough), and can clean up with soap and water.

jump to top of page

acrylic plastics

A range of rigid, lightweight plastics, used commonly in the form of sheets or rods, as well as in their liquid state for casting or coating. Acrylics may be made transparent, translucent, or opaque, and are available in a range of colors. (pr. uh-cri'licks)

jump to top of page

action painting

The style of painting, also called Abstract Expressionism, which developed in the 1940's in New York. Artists splashed, dripped, and drizzled pigment onto the canvases. The term action refers to the activated, gestural brushstrokes evident in a painting's surface.

Example: Painter Jackson Pollock's Full Fathom Five, 1947

jump to top of page

adhere

Stick securely.

See Also:  adhesives

jump to top of page

adhesion

The act or state of adhering.

See Also:  adhesivesabsorption

jump to top of page

adhesives

Substances, like glue, paste or cement, which cause adhesion, or stickiness. Apply them to clean, dry surfaces. Drying times can usually be reduced by increasing the temperature. 70° F or higher is generally preferred. Use caution with catalysts and solvents, because most are toxic or hazardous. Softwoods require more clamping time than hardwoods. Because they are so absorbent, endgrain surfaces should receive two applicationsthe second only after the first is dry. Clamp joints together whenever possible for increased strength. Applying too much adhesive can weaken a joint in some cases. Follow the directions on the package. Various types include mucilage, rubber cement, hot-glue, epoxy, cyanoacrylic and silicone. Factors determining choice are likely to be: the surfaces to be adhered (porous or nonporous), and needs for strength, toxicity, water resistance, flexibility, temperature range, setting time, and expense.

jump to top of page

adze

A tool used in wood carving to rough out a form. It is similar to an ax, but the blade is set horizontally in the handle, sloping downwards. It is used for much the same purpose as a wood chisel and often for work of such detail, especially by African carvers.

jump to top of page

aerugo

Rust, especially of copper and brass

See Also:  patinaaes ustum

jump to top of page

aes ustum

The patina on bronze, formed by oxidisation, and thus an indication of antiquity

See Also:  patinaaerugo

jump to top of page

aesthetics

The study of the principles of beauty, as set up by a system of visual, moral, or cultural criteria. These criteria are then used to judge the quality of pieces of art.

Example: John Ruskin, a British art critic of the late 19th century proposed as series of moral imperatives to improve the work of the artists of the Arts and Crafts movement and the Pre-Raphaelites.

jump to top of page

agate burnisher

natural stone with colored bands of purple or brown, shaped and polished for use as a burnishing tool, particularly in gilding.

jump to top of page

agateware

Clay patterns and structures formed by laminating, mixing or inlaying different colored clays, to give an effect like agate stone

jump to top of page

agglutinate

To cause adhesion, as with glue. To join together into a group or mass. Any glue or adhesive, especially a binder used in aqueous paints, pastel, and drawing inks, can be considered an agglutinant.

See Also:  gouachetemperawatercolor

jump to top of page

aggregate

Inert granular material such as sand or gravel which is mixed with cement to make concrete, or with a binder to make some other solid compound. Sand is the most common aggregate. An aggregate might be added to a mixture to add strength, hardness, softness, color, texture, or economy. For instance, to make plaster easier to carve, one can add an aggregate of vermiculite or perlite (both available at gardening stores.)

See Also:  filler

jump to top of page

airbrush

A precision spray gun attached to an electric air compressor (or other means of air pressure), or the use of this device to spray paints, dyes or inks. A great variety of spraying effects can be achieved using an airbrush, typically for very smooth applications or gradations of color. The use of airbrush is strongly associated with commercial art, in which it is often used in illustrations, in photographic retouching, and other types of painting. Computer "paint" and photography programs usually have the ability to simulate this painting method.

jump to top of page

alabaster

A white or yellowish white translucent stone, which is a type of gypsum found in England and Italy. Its softness makes it easy to carve, but also easily broken, soiled, and weathered. The "alabaster" of ancient Egypt and Rome is actually a much harder stone-- onyx-marble, which is a calcium carbonate, whereas ordinary gypsum is a calcium sulfate.

Example: Sculptor Anish Kapoor's rough forms often are made of alabaster.

jump to top of page

Albany slip

A slip clay that can produce a very dark brown glaze. Albany slip is mined near Albany, New York. Similar clays from other localities were used by early American potters in making stoneware.

See Also:  ceramicspottery

jump to top of page

albumen print

A paper for making photographic prints, on which egg whites (albumen) coated the paper in order to increase its sensitivity, adding to the brightness of whites in the picture. This process was invented in the mid-19th century by Blanquart-Evrard. Albumen prints were the state of the art in photography from 1855 to 1895, when gelatin provided a more stable effect.

jump to top of page

alcohol

A colorless, volatile, flammable liquid, synthesized or obtained by fermentation of sugars and starches and widely used, either pure or denatured, as a solvent and in numerous manufactures as well as in intoxicating beverages. Types include absolute alcohol, ethanol, ethyl alcohol (solvent for shellac and some other resins), grain alcohol, denatured alcohol (inexpensive, because not taxed, and readily available, this is the type artists use most.) Denatured alcohol is ethyl alcohol to which a poisonous substance, such as acetone or methanol, has been added to make it unfit for consumption. Also an alcohol, although from other compounds, is methanol (also known as methyl alcohol, wood alcohol), whose liquid and vapors are highly toxic.

jump to top of page

alizarin

A synthetic coal-tar dye used in the manufacture of pigments.

jump to top of page

alkaline

A material with a pH greater than 7.

jump to top of page

alkyd resins

Synthetic resins used in better-quality industrial house paints, enamels, and varnishes for over sixty years. In artists' materials, they have proven promising particularly as ingredients in oil paints.

jump to top of page

alla prima

A method of oil painting in which the picture is completed with the first application of paints to the entire area, instead of being built up by layering. Italian for "the first time." (pr. ah-lah-pree'mah)

See Also:  abbozzo

jump to top of page

allegory

A piece of art that represents another idea or meaning other than its literal design. The message of the work is conveyed by the figures or objects, the composition, and the style of the depiction. Roman and Greek myths are often referred to in allegorical works of the Renaissance.

Example: Painter Sandro Botticelli's Birth of Venus, 1482.

jump to top of page

alloy

A metal produced by combining two or more metals-- mixed together at the molecular level, in their molten state. Examples of alloys: brass, britannia, bronze, electrum, nichrome, niello, pewter and steel.

See Also:  aluminum

jump to top of page

altarpiece

A piece of art which stands behind, or is set above an altar of a Christian church. Most are painted, often on panels hinged together. In multi-paneled altarpieces the long horizontal and vertical panels under the central image are called predellas.

Example: Painter Hugo van Der Goes' Portinari Altarpiece, c. 1476

jump to top of page

altered proportion

A technique used by an artist to change the size relationship of shapes in an artwork.

jump to top of page

aluminum

A silvery-white, ductile metal, having good conductive and thermal properties, and used to form many hard, light, alloys which are corrosion-resistant due to a protective oxide that forms on its surface. Aluminum melts at 1220°F (660.2°C) and can be cast and welded. It is available in a wide variety of colors, is often used in paints, foil, jewelry, and welding and is used when lightness combined with strength is desired. Aluminum is derived from bauxite. Although bauxite is the most abundant metal in the earth's crust, the processes necessary to creating aluminum were not developed until 1825, and aluminum not used extensively until the 20th century. Atomic symbol Al; atomic number 13; atomic weight 26.98; specific gravity 2.69; valence 3. This metal, known as aluminum in the United States, is known as aluminium in most other countries.

jump to top of page

amyl acetate

Derived from alcohol, and used as a solvent for some synthetic resins.

jump to top of page

anaglyph

A sculpture or decoration in relief, such as a cameo.

jump to top of page

analogous colors

Colors that are next to each other on the color wheel and are closely related. For example, blue, blue-green, and green all have the color blue in common. Families of analogous colors include the warm colors (red, orange and yellow) and the cool colors (green, blue and violet). Analogous colors are sometimes referred to as adjacent colors. (pr. a-na"lah-gus')

jump to top of page

anhydrous

without water.

jump to top of page

aniline dye

A class of synthetic organic dyes originally obtained from aniline (coal tars), which were the first synthetic dyes. Today the term is used with reference to any synthetic organic dye and pigment, regardless of source, in contrast to animal or vegetable coloring products, natural earth pigments and synthetic inorganic pigments. Aniline dyes are classified according to their degree of bright­ness or lightfastness. Basic dyes are known for their extreme brightness as well as their lack of colorfastness.

jump to top of page

animation

Giving motion to a thing. Also, making animated cartoons-- films that are also called animations. Types of animation include cell animation, clay animation (also called claymation), and computer animation.

jump to top of page

anneal

To heat and then cool metal or glass to remove internal stresses and make it easier to work when cool. This heating and slow cooling can strengthen, harden, and reduce brittleness. Mild steel and brass are allowed to cool slowly, while other metals, such as copper, may be quenched in water. Aluminum and glass are annealed by different processes.

See Also:  malleable

jump to top of page

annunciation

The announcement by the Angel Gabriel to the Virgin Mary of her role in carrying the baby Jesus. This theme was popular in the first half of the 15th century, and was often set in Gothic style architecture.

Example: Painter Fra Angelico's Annunciation, c. 1440-1445

jump to top of page

anodizing

To coat aluminum electrolytically with a protective or decorative oxide. This also greatly increases aluminum's ability to permanently hold paints and other coating materials.

jump to top of page

anthropomorphism

The attribution of human forms or qualities to inanimate objects, gods, or animals. This can be seen in the depictions of Christian and Hindu Gods, whose forms are human.

Example: Michelangelo's Creation of Adam panel, Sistine Chapel, Rome, 1508-1512

jump to top of page

antimony

A silvery white, brittle, yet soft metal, used primarily in alloys to improve the working qualities of other metals, britannia and pewter, for example. Antimony sulfide has been used as the cosmetic known as kohl in Egypt and other Middle Eastern countries.

jump to top of page

antiquing

Using a glaze, often of burnt or raw umber over a work of art to create an appearance of age. Sometimes refers to the act of shopping for antiques.

jump to top of page

anvil

A heavy, steel-faced iron block on which to shape metal by hammering or forging-- wrought metal, or metal that is red-hot and malleable, then hammered into shape. Most anvils have both flat and curving surfaces

jump to top of page

aperture

An opening. In photography, the circular hole in the front of the camera lens which controls the amount of light allowed to pass on to the film. On all but very inexpensive cameras the size of the aperture is variable. The degree of variability is indicated by "f" numbers (f/stop). A great way to gain an understanding of apertures is to make and use a pinhole camera.

jump to top of page

applied arts

The arts concerned with making objects with functional purposes, but for which aesthetic concerns are significant. The applied arts may include architecture, interior design, the design of manufactured items, ceramics, metalwork, jewelry, textiles, glass, furniture, graphics, clocks and watches, toys, leather, arms and armor, musical instruments, etc. Commercial art may be considered a branch of applied art. The applied arts are usually contrasted with the fine arts (drawing, painting, sculpture, fine printing, etc.), which are seen as serving no purpose other than providing an aesthetic experience. Most of the applied arts might also be described as design. The distinction between the applied and the fine arts did not emerge strongly until the time of the Industrial Revolution, and accompanied a growing secularization of art and the emergence of a need felt by some artists to replace dying spiritual values with purely aesthetic values, setting art apart from the rest of life. Nevertheless, some have emphasized the importance of craft and regard the distinction between the fine and the applied arts as false and undesirable. Even to those who see it as important to make this distinction, many objects make it very difficult because their purposes are so dominated by their aesthetic ones.

jump to top of page

appliqué

A design made by stitching pieces of colored fabric onto a larger piece of cloth. Appliqué is used for wall hangings and as decoration on clothing, quilts and pillows. (pr. ap'ple-kay

jump to top of page

apse

A semicircular or polygonal space with an arched or vaulted ceiling. Apses are commonly found in the eastern end of a Christian church or Roman Basilica's cross shaped plan.

Example: St. Mark's Church, Venice, Italy, begun 1063+C26

jump to top of page

aqua fortis

Latin for nitric acid. In etching, the mordant or solution used to etch the plates, diluted for use with one to five parts water.

jump to top of page

aquagraph

A monoprint made by painting with a water medium on a metal, glass, or plastic plate and pulling one print from that plate. Additional colors can be printed by aligning the paper to the plate design.

jump to top of page

aquarelle

The technique of drawing or painting with transparent watercolors, or a piece of work made this way. French for "watercolor."

jump to top of page

aquarelle brush

A particular style of watercolor brush, used flat for large areas and on the edge for fine lines.

jump to top of page

aquatint

An intaglio, etching, and tonal printing process in which a porous ground allows acid to penetrate to form a network of small dots. Aquatints often resemble wash drawings. Any pure whites are stopped out entirely before etching begins, then the palest tints are bitten and stopped out, and so on as in etching. This process is repeated 20 to 30 times until the darkest tones (deepest recesses in the plate) are reached.

jump to top of page

aquatint mezzotint

In etching, a plate is first bitten in a solid aquatint, and then a design is worked on top of the aquatint with a scraper and burnisher, producing a result similar to a mezzotint.

jump to top of page

aqueduct

A man-made channel for water which is often formed as a bridge across a body of water. Aqueducts were an important development of the Roman Empire, and used a gradual flow of gravity to convey water across expansive distances. More elaborate aqueducts were multi-storied, vaulted works of structural art.

Example: Pont-du-Gard, Nimes, France, c. 16 B.C.

jump to top of page

aqueous

Watery. Often used to designate pigmented media in which water is an ingredient in the vehicle, as in gouache, tempera, and watercolors. Such media are water-soluble.

jump to top of page

archaic art

Greek art from the sixth century B.C. Typical of this period are stone carved statues of male kouros, and female kore. The kore are known for their enigmatic Archaic Smile.

Example: Peplos Kore from the Acropolis, Athens, Greece, c. 530 B.C.

jump to top of page

architectural order

The system of categorizing Classical architecture invented by Vitruvius in the first century B.C. Three basic forms of columns comprise the heart of the system, and are called Doric, Ionic, and Corinthian.

Example: The Acropolis, Athens, Greece, 447-438 B.C.

jump to top of page

armature

The metal framework supporting the material of a sculpture. This skeleton is often made from steel and Cor-Ten.

Example: Sculptor Claes Oldenberg's Clothespin, 1976

jump to top of page

Armory Show

The influential exhibition of 1913 which was held in New York. The Armory Show marked the introduction of Modernist, Paris-based artists to Americans.

jump to top of page

asphaltum

In etching, a liquid that is used on plates as a soft ground, and on the backs of plates to protect them from the mordant. In lithography, asphaltum is used to chemically process the drawing. Also, an old color which was found to be destructive to paintings.

jump to top of page

assemblage sculpture

A three-dimensional composition made of various materials such as found objects, paper, wood, and cloth.

jump to top of page

assumption

The image of the Virgin Mary's soul and body being conveyed to Heaven, three days after her death. This image first appeared in the Gothic sculpture of the 13th century, and was popular in the Italian Renaissance.

Example: Titian's Assumption, c. 1518

jump to top of page

atelier

The studio or workshop of an artist or print-maker. Ateliers acted as schools for young artists, who were often apprenticed to live and work in the atelier of an influential painters and sculptors.

Example: Michelangelo worked in the atelier of Domenico Ghirlandaio

jump to top of page

auger

A tool for drilling deeply into wood, an auger is a long metal shaft with a spiral drill and cutting blades at one end.

jump to top of page

autographic ink

In lithography, a type of greasy ink

jump to top of page

autography

In graphic arts, the process by which the pen and greasy ink drawing is transferred from paper to stone. In lithography, reproduction of a print on autographic paper.

See Also:  autographic ink

jump to top of page

avant-garde

Describing a person or idea which is progressive or ahead of its time. Any trendsetter or vanguard artist can be said to be avant-garde.

Example: Robert Smithson's developments in Earth Art, in particular Spiral Jetty, 1970.

jump to top of page
Latest Product Reviews
Nicely finished and easy to assemble
- William c hunter in San Rafael, CA
High quality film with fast shipping. Thank you
- Dave in Charlotte
This item is certainly not what it used to be. The paper is thinner in the pages. The covers are thinner. They went from 2 zippers to one. Basically the overall quality went down while the price went up. Stall a great biner but very disappointed.
- Tevye in Califcornia
Free Download for Kids

Download free coloring book pages Download FREE coloring
book pages to color at
home or school.

View Pages »